Standard Exerciser Specifications

 

Models: 300FF (3 Horse), 400FF (4 Horse), 500FF (5 Horse), 600FF (6 Horse), 700FF (7 Horse), 800FF (8 Horse)
Working Diameter: 40 to 80 ft depending on choice of model.  Customized Diameters available – of any diameter needed, for example 41, 42, 43, etc – all the way up to 80 ft.
Speeds: Remote Controlled 0 MPH to 32 MPH, Forward and Reverse.
Arms & Mast:
  • Square Structural, seamless tubing.
  • Arm Height is 8 ft from the ground.
  • Arm Radius is 20 to 34 ft depending on choice of model.
  • Working width for horse is 8ft.
  • Length distance is 32 ft, minimum, between individual moving screens, based on model & diameter.
Power Drive System: All Equinecisers are equipped with a 5 hp direct drive electrical motor to a speed reduction gearbox. Motors are hi-torque, heavy duty, thermally protected with auto reset. The unit requires a power input of 220-volt single phase.

Your breaker panel must have 2 – 20 amp double pull (for the 220V input) & 1 – 20 amp single pull for your Equineciser to work correctly. The power input to the exerciser cannot exceed 125 feet from the center of  the exerciser to your power breaker panel. If it is further away you will need to install a subpanel to get it closer to the exerciser so the computer drive will work properly.

Remote Controller: All of the Equinecisers come with a remote control with a directional control switch, for forward and reverse and an emergency safety stop switch.
Exerciser Finish: The exterior cover of the exerciser, head and arms of the exerciser are all powder coated. Arm screens are not painted but are galvanized to permit the screen electrical charger to work. All the fencing panels are galvanized but can be powder coated as an optional upgrade.
Enclosure Panels: Standard is 6 ft tall, and 8 ft long outside panels, inside panels are 7 ft  tall and 8 ft long. Galvanized welded wire, which is welded to panel frame, and is 6 ft in height, and spring-loaded latches on each gate panel. The framework is 1 7/8″ round galvanized steel pipe. Gate panels have a 6 ft opening. Remainder of panel opening is filled with a horizontal bar so horse cannot put head through any part of each fence panel.
Fence Finishing: The standard steel framework of the fence panels comes galvanized. The framework is of round tubing, with welded wire attached, on the lower 6 feet.
New curved fencing option offers curved sections of 8 ft long and 7 ft high.
Exerciser
Options :
  • Programmable programs.
  • Conveyor belting on each panel to retain footing in the exercising path (2, 3, 4 ft in height).
  • Rubber lined panels on the lower 2 feet attached to each panel for soil retention.
  • Radius Fencing galvanized or painted (powder coated).

Panel Options:
  • Lower 4′ X 8′ section solid steel, or steel & wood laminated, or wood (2″ x 6″ boards), or extruded white or tan PVC 2″ X 6″ panels inserted into steel framework, or T1-11 & steel laminated.
  • All panels can be lined with rubber matting (2, 3 or 4 ft) on the lower 2 ½ feet, to aid in soil retention.
  • Optional wood panel wood is framed in our standard size of 7’ tall and 6’  long to a height of either 4’ or 5’ with the remaning opening having a horizontal bar installed for the horses’ safety.
  • We also make a panel that has a baked on color to a steel exterior, a plywood core and a galvanized steel interior , next to the horse with horizontal bars placed to 7’ in height. All these upgrades can have rubberized panels attached to each panel for longer longivity of each of the panels. Height can be 2, 3, or 4’.